-
Australia
Copyright © 2025 Powered by BCI Media Group Pty Ltd
Confirm Submission
Are you sure want to adding all Products to your Library?
Contact Detail
There is no bridge too far for this week’s wall DCT-W21-1. When it comes to NCC 2019 Section J requirements for an insulated steel or timber frame, “I’ll cross that bridge when I come it,“ no longer applies.
When building a type A or type B non-combustible wall construction, your thermal break also needs to be non-combustible so look no further to bridge that performance gap than the DCT VulcanWool Thermal Break Strip
“Take a break” and check out our DCT Speckel R-value calculator, select our non-combustible thermal break strip, and be amazed at the impact it makes.
DCT-W21-1 LIGHTWEIGHT THERMALLY BROKEN STEEL FRAME WALL (VULCANWOOL)
A lightweight clad steel frame wall insulated by non-combustible DCT Vulcanwool and a continuous Vulcanwool high compressive strength thermal break strip fixed between the cladding and the frame to form a drained and vented cavity. The frame and insulation are protected by a vapour permeable, air and water tight ProctorPassive sarking membrane. The SmartVap intelligent air barrier membrane installed to the inside face of the frame is sealed to form a continuous air and vapour control layer. As the VulcanWool insulation and thermal break strip are both deemed non-combustible, this solution is suitable for deemed to satisfy type A or B non-combustible wall construction.
To find out more about the bridge builder, visit the DCTechnical Library