Dulux MaxiFlex™ Stretch Technology gives a tough, flexible finish for long life protection from all Australian weather conditions. Dulux guarantees that this product will not blister, flake or peel for as long as you are living in your house*.
Features:
- Self priming on most surfaces. Please note: Chromamax bases are not self priming
- Water based
- The Dulux Promise. Guaranteed for as long as you are living in your house*.
- UV Protection
- Dulux MaxiFlex™ Stretch Technology
Benefits:
- 2 hour recoat and easy clean up
- High performance colour durability
- Helps resist mould, dirt and stains
- Apply by brush, roller or spray
- The benefit of MaxiFlex™ Stretch Technology is that it allows the coating to expand and contract with the substrate beneath.
Uses
Dulux Weathershield is an exterior paint that is self priming on most surfaces. It is ideal for the above mentioned surfaces in domestic and commercial exterior areas. Dulux Weathershield should be used when quality and protection cannot be compromised. ,THE DULUX PROMISE Guaranteed for as long as you are living in your house. We guarantee, as long as Weathershield is applied in accordance with the instructions for use, Weathershield will not PEEL, FLAKE or BLISTER for as long as you are living in your house. We should know, we have been testing Weathershield in Australian Conditions for over 40 years. We believe in the quality of Weathershield so strongly, that if it doesn’t deliver, we will replace the product free of charge. It’s the Dulux Promise. This guarantee does not cover paint failure caused by any breakdown of coatings applied previously, where Weathershield is applied over coatings not specified by Dulux or in the event of substrate failure. To claim you must be living in the house you have painted with Weathershield.
Surface preparation
All surfaces must be thoroughly cleaned and free of all dirt, dust, grease, loose or flaking paint. Metal surfaces should be free of rust, salts & any signs of corrosion. Efflorescence or mould on masonry or concrete surfaces must be treated. Occasionally an apparently sound old paint will lose adhesion when recoated, particularly if the new paint is darker in colour. To avoid this, check the adhesion of the old paint by cutting an X through a clean area of the film with a sharp knife, press cellulose tape firmly across the cut and rip it off. If the old paint comes off with the tape it should be removed before repainting.
For more colours, click the link below: https://www.dulux.com.au/colour
Dulux MaxiFlex™ Stretch Technology gives a tough, flexible finish for long life protection from all Australian weather conditions. Dulux guarantees that this product will not blister, flake or peel for as long as you are living in your house*.
Features:
- Self priming on most surfaces. Please note: Chromamax bases are not self priming
- Water based
- The Dulux Promise. Guaranteed for as long as you are living in your house*.
- UV Protection
- Dulux MaxiFlex™ Stretch Technology
Benefits:
- 2 hour recoat and easy clean up
- High performance colour durability
- Helps resist mould, dirt and stains
- Apply by brush, roller or spray
- The benefit of MaxiFlex™ Stretch Technology is that it allows the coating to expand and contract with the substrate beneath.
Uses
Dulux Weathershield is an exterior paint that is self priming on most surfaces. It is ideal for the above mentioned surfaces in domestic and commercial exterior areas. Dulux Weathershield should be used when quality and protection cannot be compromised. ,THE DULUX PROMISE Guaranteed for as long as you are living in your house. We guarantee, as long as Weathershield is applied in accordance with the instructions for use, Weathershield will not PEEL, FLAKE or BLISTER for as long as you are living in your house. We should know, we have been testing Weathershield in Australian Conditions for over 40 years. We believe in the quality of Weathershield so strongly, that if it doesn’t deliver, we will replace the product free of charge. It’s the Dulux Promise. This guarantee does not cover paint failure caused by any breakdown of coatings applied previously, where Weathershield is applied over coatings not specified by Dulux or in the event of substrate failure. To claim you must be living in the house you have painted with Weathershield.
Surface preparation
All surfaces must be thoroughly cleaned and free of all dirt, dust, grease, loose or flaking paint. Metal surfaces should be free of rust, salts & any signs of corrosion. Efflorescence or mould on masonry or concrete surfaces must be treated. Occasionally an apparently sound old paint will lose adhesion when recoated, particularly if the new paint is darker in colour. To avoid this, check the adhesion of the old paint by cutting an X through a clean area of the film with a sharp knife, press cellulose tape firmly across the cut and rip it off. If the old paint comes off with the tape it should be removed before repainting.
For more colours, click the link below: https://www.dulux.com.au/colour
Dulux MaxiFlex™ Stretch Technology gives a tough, flexible finish for long life protection from all Australian weather conditions. Dulux guarantees that this product will not blister, flake or peel for as long as you are living in your house*.
Features:
- Self priming on most surfaces. Please note: Chromamax bases are not self priming
- Water based
- The Dulux Promise. Guaranteed for as long as you are living in your house*.
- UV Protection
- Dulux MaxiFlex™ Stretch Technology
Benefits:
- 2 hour recoat and easy clean up
- High performance colour durability
- Helps resist mould, dirt and stains
- Apply by brush, roller or spray
- The benefit of MaxiFlex™ Stretch Technology is that it allows the coating to expand and contract with the substrate beneath.
Uses
Dulux Weathershield is an exterior paint that is self priming on most surfaces. It is ideal for the above mentioned surfaces in domestic and commercial exterior areas. Dulux Weathershield should be used when quality and protection cannot be compromised. ,THE DULUX PROMISE Guaranteed for as long as you are living in your house. We guarantee, as long as Weathershield is applied in accordance with the instructions for use, Weathershield will not PEEL, FLAKE or BLISTER for as long as you are living in your house. We should know, we have been testing Weathershield in Australian Conditions for over 40 years. We believe in the quality of Weathershield so strongly, that if it doesn’t deliver, we will replace the product free of charge. It’s the Dulux Promise. This guarantee does not cover paint failure caused by any breakdown of coatings applied previously, where Weathershield is applied over coatings not specified by Dulux or in the event of substrate failure. To claim you must be living in the house you have painted with Weathershield.
Surface preparation
All surfaces must be thoroughly cleaned and free of all dirt, dust, grease, loose or flaking paint. Metal surfaces should be free of rust, salts & any signs of corrosion. Efflorescence or mould on masonry or concrete surfaces must be treated. Occasionally an apparently sound old paint will lose adhesion when recoated, particularly if the new paint is darker in colour. To avoid this, check the adhesion of the old paint by cutting an X through a clean area of the film with a sharp knife, press cellulose tape firmly across the cut and rip it off. If the old paint comes off with the tape it should be removed before repainting.
For more colours, click the link below:
https://www.dulux.com.au/colour
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
