Product code:
FC303030-20KG
Renderoc HB70 is a high build repair mortar for localised repair of reinforced concrete > 45MPa. Meets the requirements of EN1504-3 Class R4. It can be applied to vertical concrete patches up to 40 mm deep. Suitable for use with Galvashield anode protection systems.
Typical Applications:
- Vertical & overhead patch repairs
- Localised trowel or wet spray application, up to 1m2 repair area
- Trowel build depth between 5-40mm required, and required strength >45 MPa
Advantages:
- Compatible with concrete strength > 45MPa
- High strength - suitable for structural repairs
- Abrasion resistant - suitable for aggressive environments
- Shrinkage compensated - provides long termdimensional stability
- Low permeability to potentially damaging water, CO2and chloride ions
- Suitable for use with Galvashield anodes
- Can be applied using wet-spray process - providingfaster high build repairs
- Pre-bagged to overcome site-batched variations - only the site addition of clean water required
- Complies to AS/NZS4020:2018 - suitable for use in potable water
Product code:
FC303030-20KG
Renderoc HB70 is a high build repair mortar for localised repair of reinforced concrete > 45MPa. Meets the requirements of EN1504-3 Class R4. It can be applied to vertical concrete patches up to 40 mm deep. Suitable for use with Galvashield anode protection systems.
Typical Applications:
- Vertical & overhead patch repairs
- Localised trowel or wet spray application, up to 1m2 repair area
- Trowel build depth between 5-40mm required, and required strength >45 MPa
Advantages:
- Compatible with concrete strength > 45MPa
- High strength - suitable for structural repairs
- Abrasion resistant - suitable for aggressive environments
- Shrinkage compensated - provides long termdimensional stability
- Low permeability to potentially damaging water, CO2and chloride ions
- Suitable for use with Galvashield anodes
- Can be applied using wet-spray process - providingfaster high build repairs
- Pre-bagged to overcome site-batched variations - only the site addition of clean water required
- Complies to AS/NZS4020:2018 - suitable for use in potable water
Product code:
FC303030-20KG
Renderoc HB70 is a high build repair mortar for localised repair of reinforced concrete > 45MPa. Meets the requirements of EN1504-3 Class R4. It can be applied to vertical concrete patches up to 40 mm deep. Suitable for use with Galvashield anode protection systems.
Typical Applications:
- Vertical & overhead patch repairs
- Localised trowel or wet spray application, up to 1m2 repair area
- Trowel build depth between 5-40mm required, and required strength >45 MPa
Advantages:
- Compatible with concrete strength > 45MPa
- High strength - suitable for structural repairs
- Abrasion resistant - suitable for aggressive environments
- Shrinkage compensated - provides long termdimensional stability
- Low permeability to potentially damaging water, CO2and chloride ions
- Suitable for use with Galvashield anodes
- Can be applied using wet-spray process - providingfaster high build repairs
- Pre-bagged to overcome site-batched variations - only the site addition of clean water required
- Complies to AS/NZS4020:2018 - suitable for use in potable water
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
