-
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
Interthane 990: Premium High Gloss / Steel: AS/NZS 2312.1:2014 - System Designation PUR5
Enhanced
$$ Standard
Australia 
Classification Code
| Surespec | : |
0672-Textured & membrane coatings
|
| Speedspec | : |
09910-Painting
09211-Acrylic Texture Render
|
General Specification
| 1st Coat | : | Interzinc 52E | Interzinc 52 |
| 2nd Coat | : | Interplus 1180 |
| 3rd Coat | : | Interthane 990E / Interthane 990 |
| Pre-Treatment - Cleaning | : | All surfaces should be assessed and treated as per ISO 8504:2000 | Oil or grease should be removed in accordance with SSPC-SP1 solvent cleaning. Surface salts concentration (e.g. chloride deposits) shall be less than 10 µg/cm2 prior to painting |
| Pre-Treatment - Fabrication | : | All surfaces shall be finished as per ISO 8501-3 Table 1 / Grade P2 with all edges rounded to minimum 2mm radius |
| Substrate | : | Steel |
| Surface Preparation | : | Abrasive blast clean to Sa2.5 (ISO 8501-1:2007) or SSPC-SP6 | A sharp, angular surface profile of 50-75 microns (2-3 mils) is recommended |
Size
| Nominated Dry Film Thickness Per Coat (Microns) | : | 1st Coat: 75 µm / 2nd Coat: 200 µm / 3rd Coat: 50 µm |
| Total System Dry Film Thickness (Microns) | : | 325 µm |
Technical
| AS/NZS 2312.1: 2014 System Designation | : | PUR5 |
| Colour Availability | : | Available in a wide range of colours via International Chromascan Tinting System (including AS 2700, RAL, BS and custom colours). Interhane 870 is also availble in a wide range of metallic colours |
| Durability (As Per AS/NZS 2312.1:2014) | : | C2 (Low): 25+ years / C3 (Medium): 25+ years / C4 (High): 25+ years / C5 (Very High): 15-25 years |
| NATSPEC National Classification System | : | 0345 Steel - Protective Paint Coatings / 0671 Painting |
| SpecPack | : | 09910 Painting |
| SpeedSpec | : | 09910 Painting |
| Warranty | : | Refer to International Protective Coatings for further details relating to performance warranty |
