-
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
Interchar 3120: Solvent Free 90 Minute Epoxy Intumescent Passive Fire Protection (PFP) / Decorative Steelwork Up to C3 (as per AS/NZS 2312.1: 2014)
Enhanced
$$ Standard
Indonesia 
Classification Code
| Surespec | : |
0346-Structural fire protection systems
0672-Textured & membrane coatings
|
| Speedspec | : |
07810-Fireproofing
09910-Painting
09211-Acrylic Texture Render
|
General Specification
| 1st Coat | : | Interchar 3120 |
| 2nd Coat | : | Interthane 870 |
| Pre-Treatment - Cleaning | : | All surfaces should be assessed and treated as per ISO 8504:2000 Oil or grease should be removed in accordance with SSPC-SP1 solvent cleaning | Surface salts concentration (e.g. chloride deposits) shall be less than 10 µg/cm2 prior to painting |
| Pre-Treatment - Fabrication | : | All surfaces shall be finished as per ISO 8501-3 Table 1 | Grade P2 with all edges rounded to minimum 2mm radius |
| Substrate | : | Steel |
| Surface Preparation | : | Interchar 3120 may be applied directly to black steel | The condition of the black steel should be no worse than Grade B as defined in ISO8501-1:2007 | All rust and millscale must be tightly adhered |
Size
| Nominated Dry Film Thickness Per Coat (Microns) | : | 1st Coat: 75 µm / 2nd Coat: Please consult International Protective Coatings |
| Total System Dry Film Thickness (Microns) | : | Final system dry film thickness is dependent on steel section details | Please consult International Protective Coatings |
Technical
| AS/NZS 2312.1: 2014 Environmental Classification | : | Up to C3 (Internal & External) |
| Certification | : | Assessed in accordance with AS 1530.4 and AS4100 |
| Colour Availability | : | Available in a wide range of colours via International Chromascan Tinting System (including AS 2700, RAL, BS and custom colours) |
| Fire Resistance Level (FRL) | : | Up to 90 / - / - |
| NATSPEC National Classification System | : | 0346 Structural fire protection systems |
| SpecPack | : | 09910 Painting |
| SpeedSpec | : | 09910 Painting |
| Warranty | : | Refer to International Protective Coatings for further details relating to performance warranty |
