KingZip Standing Seam

Application

:

All roofing applications where the installed roof pitch is 1.5º or greater | Used as a vertically laid wall cladding solution

Colour

:

Grey

Finishes

:

Mill finish or plain stucco embossed finish | PVDF and Kingspan Polyester | Colorbond standard, ultra and matt

Installation

:

Exterior

Material

:

Aluminium | Steel

Material detail

:

Aluminium: 0.90 mm or 1.20 mm | Steel: 0.55 mm or 0.75 mm (COLORBOND Steel), Aluminium: 0.90 or 1.20 mm | Steel: 0.55 or 0.75 mm (COLORBOND Steel)

Type

:

Standing seam

Usage

:

Roofing

Cover width

:

300 mm | 400 mm | ± 2 mm

Edge squareness

:

1 % of sheet cover width

Nominal thickness

:

0.90 mm , 1.20 mm (aluminium) | 0.75 mm (Colorbond Steel), 0.90 mm | 1.20 mm (aluminium) | 0.75 mm (Colorbond Steel)

Over 10 m long

:

+10 mm (+1 mm per metre length over 10 m) / -5 mm

Profile depth

:

65 mm

Sheet length

:

1.5 mm to 15 mm (factory rolled – due to transport limitation) | 1.5 mm to 150 mm (site rolled)

Sheet width

:

300 mm and 400 mm standard pan widths | 400 mm is most economical | Custom pan widths available from 200 mm - 400 mm

Up to 10 m long

:

+10 mm / -5 mm

Can be tapered

:

Yes

Drumming

:

BS 5427: 2016+A1: 2017 states that this noise can be reduced by the introduction of a flexible insulation layer directly under the outer sheets

End Laps

:

For a pitch greater than 3° the overlap joint must be fixed with end lap rivets (6604/6/3W) | Sealed with end lap sealant (TAPE/BM/06)

Finishes and coating

:

The external weather sheet is available in either Colorbond Steel or aluminium in a variety of finishes including; mill finish or plain stucco embossed finish, and PVDF coatings

Fire performance

:

Deemed to Satisfy (DTS) non-combustible under provision C1.9 (e)(v) of the National Construction Code

Lightning Protection

:

Requirements of BS EN/IEC 62305 | Roof systems combined with the steel frame of the building can be used to provide a principal lightning protection system

Reaction to fire

:

Combustibility test for materials: AS 1530.1: 1994 (2016) | Ignitability Index: 0 | Spread of Flame Index: 0 | Heat Evolved Index: 0 | Smoke Developed Index: 1 - 2

Suitable for curved applications

:

Can be curved to 5 m for convex and 8 m for concave (For 0.9 mm thick aluminium)