15MM X 15MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
20MM X 20MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
25MM X 25MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
32MM X 32MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
40MM X 40MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
50MM X 50MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
65MM X 65MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
80MM X 80MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
100MM X 100MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
KemPress fittings are available in 3 types based on their application and O-ring; Water, Gas & High Temperature. Inside each fitting is a sealing element called an Elastomeric O-ring. Fittings are available for Water (EPDM – Black), Gas (HNBR – Yellow) and High Temperature/Solar (FKM – Red). They are not interchangeable for their different applications.
As well as an Elastomeric O-ring, DN65-100 fittings also contain a dual layer stainless steel grip ring and separation ring which deliver the required joint strength when pressed.
KemPress fittings are not suitable for Medical Gas, Refrigeration & Air Conditioning applications, Acetylene, Urea Solution, Methanol, Glycerin Triacetate, Coolant Inhibitor, Sodium Hydroxide or Ammoniac-gaseous.
For further information regarding suitability of KemPress fittings for applications, refer to the O-ring Specification table in the KemPress Design & Installation Guide available on this website or contact MM Kembla customer service.
- Water
Water applications use an EPDM (Ethylene Propylene Diene Monomer) O-ring sealing element. This O-ring is suitable for standard water applications designated below. It can be used for domestic solar hot water applications. For industrial solar or hot water temperatures exceeding 120°C, the HT fitting should be used.
- Gas
Gas applications use a HNBR (Hydrogenated Nitrile Butadiene Rubber) O-ring sealing element. HNBR has been used for decades in automotive and industrial applications. It is designed for gas, oil and chemical resistance. It is not suitable for drinking water. Gas fittings have a yellow O-ring and are clearly marked with a distinctive yellow colour and the word GAS.
- High Temperature (HT)
High temperature applications use an FKM (fluorocarbon) O-ring sealing element. This O-ring is suitable for domestic or industrial solar hot water applications or applications where hot water temperatures exceed 120°C (up to 200°C), often at the collector. HT fittings have a red O-ring and arec learly marked with a distinctive red colour and the word HT.
Features:
- Universal Fittings Profile
- Push & Stay Technology
- Bluetooth Equipped KemPress Tools
- Kembla Copper Tube with KemCore Technology
- Visual Press Identification
15MM X 15MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
20MM X 20MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
25MM X 25MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
32MM X 32MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
40MM X 40MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
50MM X 50MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
65MM X 65MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
80MM X 80MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
100MM X 100MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
KemPress fittings are available in 3 types based on their application and O-ring; Water, Gas & High Temperature. Inside each fitting is a sealing element called an Elastomeric O-ring. Fittings are available for Water (EPDM – Black), Gas (HNBR – Yellow) and High Temperature/Solar (FKM – Red). They are not interchangeable for their different applications.
As well as an Elastomeric O-ring, DN65-100 fittings also contain a dual layer stainless steel grip ring and separation ring which deliver the required joint strength when pressed.
KemPress fittings are not suitable for Medical Gas, Refrigeration & Air Conditioning applications, Acetylene, Urea Solution, Methanol, Glycerin Triacetate, Coolant Inhibitor, Sodium Hydroxide or Ammoniac-gaseous.
For further information regarding suitability of KemPress fittings for applications, refer to the O-ring Specification table in the KemPress Design & Installation Guide available on this website or contact MM Kembla customer service.
- Water
Water applications use an EPDM (Ethylene Propylene Diene Monomer) O-ring sealing element. This O-ring is suitable for standard water applications designated below. It can be used for domestic solar hot water applications. For industrial solar or hot water temperatures exceeding 120°C, the HT fitting should be used.
- Gas
Gas applications use a HNBR (Hydrogenated Nitrile Butadiene Rubber) O-ring sealing element. HNBR has been used for decades in automotive and industrial applications. It is designed for gas, oil and chemical resistance. It is not suitable for drinking water. Gas fittings have a yellow O-ring and are clearly marked with a distinctive yellow colour and the word GAS.
- High Temperature (HT)
High temperature applications use an FKM (fluorocarbon) O-ring sealing element. This O-ring is suitable for domestic or industrial solar hot water applications or applications where hot water temperatures exceed 120°C (up to 200°C), often at the collector. HT fittings have a red O-ring and arec learly marked with a distinctive red colour and the word HT.
Features:
- Universal Fittings Profile
- Push & Stay Technology
- Bluetooth Equipped KemPress Tools
- Kembla Copper Tube with KemCore Technology
- Visual Press Identification
15MM X 15MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
20MM X 20MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
25MM X 25MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
32MM X 32MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
40MM X 40MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
50MM X 50MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
65MM X 65MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
80MM X 80MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
100MM X 100MM KEMPRESS COPPER ELBOW 90 DEGREE GAS
KemPress fittings are available in 3 types based on their application and O-ring; Water, Gas & High Temperature. Inside each fitting is a sealing element called an Elastomeric O-ring. Fittings are available for Water (EPDM – Black), Gas (HNBR – Yellow) and High Temperature/Solar (FKM – Red). They are not interchangeable for their different applications.
As well as an Elastomeric O-ring, DN65-100 fittings also contain a dual layer stainless steel grip ring and separation ring which deliver the required joint strength when pressed.
KemPress fittings are not suitable for Medical Gas, Refrigeration & Air Conditioning applications, Acetylene, Urea Solution, Methanol, Glycerin Triacetate, Coolant Inhibitor, Sodium Hydroxide or Ammoniac-gaseous.
For further information regarding suitability of KemPress fittings for applications, refer to the O-ring Specification table in the KemPress Design & Installation Guide available on this website or contact MM Kembla customer service.
- Water
Water applications use an EPDM (Ethylene Propylene Diene Monomer) O-ring sealing element. This O-ring is suitable for standard water applications designated below. It can be used for domestic solar hot water applications. For industrial solar or hot water temperatures exceeding 120°C, the HT fitting should be used.
- Gas
Gas applications use a HNBR (Hydrogenated Nitrile Butadiene Rubber) O-ring sealing element. HNBR has been used for decades in automotive and industrial applications. It is designed for gas, oil and chemical resistance. It is not suitable for drinking water. Gas fittings have a yellow O-ring and are clearly marked with a distinctive yellow colour and the word GAS.
- High Temperature (HT)
High temperature applications use an FKM (fluorocarbon) O-ring sealing element. This O-ring is suitable for domestic or industrial solar hot water applications or applications where hot water temperatures exceed 120°C (up to 200°C), often at the collector. HT fittings have a red O-ring and arec learly marked with a distinctive red colour and the word HT.
Features:
- Universal Fittings Profile
- Push & Stay Technology
- Bluetooth Equipped KemPress Tools
- Kembla Copper Tube with KemCore Technology
- Visual Press Identification
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
