• Grind kitchen waste into fine particles and flush it away with water, which is hygienic and environmentally friendly
• Pneumatic switch and bladeless design, safe and reliable
• 1-level grinding technology, standard silent technology
• 980ml grinding chamber, stainless steel grinding components
• 0.55HP Dura-Drive® induction motor
• 240V/ 50Hz/ 380W
• Made in the USA, imported from
• 3-year product warranty, on-site inspection and professional installation services
(Please keep the original purchase receipt for warranty purposes. All models enjoy free on-site repair in the first year. Parts are provided free of charge during the warranty period. Please note that the warranty does not cover any damage caused by misuse, negligence, vandalism, failure to follow the relevant product instructions, or alteration or unauthorized repair, damage caused by improper handling during transportation, normal natural wear and tear and aging.)
1. Prepare the food waste to be processed
2. Turn on the cold water and start the food waste processor
3. Slowly pour the food waste into the sink and let the food waste processor operate until only the sound of the motor and water flow can be heard, indicating that the grinding is complete
4. After the grinding is completed, turn off the food waste processor and wait for 15 seconds before turning off the water source Note: Do not use hot water to grind food waste; when operating, you must first turn on and continue to use cold water until the grinding process is completed
Precautions
1. Grind small amounts of hard materials such as bones, fruit pits and ice. The particles form a scouring effect in the grinding chamber.
2. Grind up citrus peels to remove drain odors.
3. Do not pour grease or oil into the food waste disposer or sink drain to avoid clogging the pipe.
4. Do not use hot water to operate the food waste disposer.
5. Do not turn off the water supply or the food waste disposer before the grinding process is completed.
6. M56 and M66 cannot grind fibrous ingredients such as corn husks and bamboo shoots to prevent the fibers from getting stuck in the grinding chamber and affecting the operation of the food waste disposer.
7. Do not grind shells such as oyster/clam/snail shells, raw meat/bones/skin/hair, or high-fiber ingredients such as Chinese medicine residues/durian shells/sugarcane bagasse using any grinding method.
8. Do not use the food waste disposer to process hard materials such as glass, wood or metal.
9. Do not grind any non-food waste.
10. Avoid putting large amounts of food waste into the processor at the same time.
11. Do not put your hands or fingers into the food waste disposer.
Installation conditions of food waste disposer
• A 13A independent switch is set under the kitchen cabinet and the length of the food waste disposer wire is 600mm
• A space of about 50cmx50cm should be reserved at the bottom of the basin
• The inner diameter of the basin drain is 90mm and the outer diameter is 115mm, which is matched with the U-shaped air barrier
• A 33mm diameter hole is opened on the kitchen countertop to install the pneumatic switch. It is recommended that customers provide photos/videos of:
- The location of the basin on the kitchen countertop
- The location of the basin full of water
- The drainage level under the basin, the space inside the kitchen cabinet, the power supply location, etc. for the master's reference and arrange for the master to come to measure the location to ensure that there is enough space for installation (the on-site inspection fee is HK$250* The payment must be made in cash on site. After the installation is completed, the site inspection fee paid will be deducted from the installation service fee. If the technician confirms that the installation cannot be performed after the site inspection, the customer still needs to pay the site inspection fee of HK$250.
• Grind kitchen waste into fine particles and flush it away with water, which is hygienic and environmentally friendly
• Pneumatic switch and bladeless design, safe and reliable
• 1-level grinding technology, standard silent technology
• 980ml grinding chamber, stainless steel grinding components
• 0.55HP Dura-Drive® induction motor
• 240V/ 50Hz/ 380W
• Made in the USA, imported from
• 3-year product warranty, on-site inspection and professional installation services
(Please keep the original purchase receipt for warranty purposes. All models enjoy free on-site repair in the first year. Parts are provided free of charge during the warranty period. Please note that the warranty does not cover any damage caused by misuse, negligence, vandalism, failure to follow the relevant product instructions, or alteration or unauthorized repair, damage caused by improper handling during transportation, normal natural wear and tear and aging.)
1. Prepare the food waste to be processed
2. Turn on the cold water and start the food waste processor
3. Slowly pour the food waste into the sink and let the food waste processor operate until only the sound of the motor and water flow can be heard, indicating that the grinding is complete
4. After the grinding is completed, turn off the food waste processor and wait for 15 seconds before turning off the water source Note: Do not use hot water to grind food waste; when operating, you must first turn on and continue to use cold water until the grinding process is completed
Precautions
1. Grind small amounts of hard materials such as bones, fruit pits and ice. The particles form a scouring effect in the grinding chamber.
2. Grind up citrus peels to remove drain odors.
3. Do not pour grease or oil into the food waste disposer or sink drain to avoid clogging the pipe.
4. Do not use hot water to operate the food waste disposer.
5. Do not turn off the water supply or the food waste disposer before the grinding process is completed.
6. M56 and M66 cannot grind fibrous ingredients such as corn husks and bamboo shoots to prevent the fibers from getting stuck in the grinding chamber and affecting the operation of the food waste disposer.
7. Do not grind shells such as oyster/clam/snail shells, raw meat/bones/skin/hair, or high-fiber ingredients such as Chinese medicine residues/durian shells/sugarcane bagasse using any grinding method.
8. Do not use the food waste disposer to process hard materials such as glass, wood or metal.
9. Do not grind any non-food waste.
10. Avoid putting large amounts of food waste into the processor at the same time.
11. Do not put your hands or fingers into the food waste disposer.
Installation conditions of food waste disposer
• A 13A independent switch is set under the kitchen cabinet and the length of the food waste disposer wire is 600mm
• A space of about 50cmx50cm should be reserved at the bottom of the basin
• The inner diameter of the basin drain is 90mm and the outer diameter is 115mm, which is matched with the U-shaped air barrier
• A 33mm diameter hole is opened on the kitchen countertop to install the pneumatic switch. It is recommended that customers provide photos/videos of:
- The location of the basin on the kitchen countertop
- The location of the basin full of water
- The drainage level under the basin, the space inside the kitchen cabinet, the power supply location, etc. for the master's reference and arrange for the master to come to measure the location to ensure that there is enough space for installation (the on-site inspection fee is HK$250* The payment must be made in cash on site. After the installation is completed, the site inspection fee paid will be deducted from the installation service fee. If the technician confirms that the installation cannot be performed after the site inspection, the customer still needs to pay the site inspection fee of HK$250.
• Grind kitchen waste into fine particles and flush it away with water, which is hygienic and environmentally friendly
• Pneumatic switch and bladeless design, safe and reliable
• 1-level grinding technology, standard silent technology
• 980ml grinding chamber, stainless steel grinding components
• 0.55HP Dura-Drive® induction motor
• 240V/ 50Hz/ 380W
• Made in the USA, imported from
• 3-year product warranty, on-site inspection and professional installation services
(Please keep the original purchase receipt for warranty purposes. All models enjoy free on-site repair in the first year. Parts are provided free of charge during the warranty period. Please note that the warranty does not cover any damage caused by misuse, negligence, vandalism, failure to follow the relevant product instructions, or alteration or unauthorized repair, damage caused by improper handling during transportation, normal natural wear and tear and aging.)
1. Prepare the food waste to be processed
2. Turn on the cold water and start the food waste processor
3. Slowly pour the food waste into the sink and let the food waste processor operate until only the sound of the motor and water flow can be heard, indicating that the grinding is complete
4. After the grinding is completed, turn off the food waste processor and wait for 15 seconds before turning off the water source Note: Do not use hot water to grind food waste; when operating, you must first turn on and continue to use cold water until the grinding process is completed
Precautions
1. Grind small amounts of hard materials such as bones, fruit pits and ice. The particles form a scouring effect in the grinding chamber.
2. Grind up citrus peels to remove drain odors.
3. Do not pour grease or oil into the food waste disposer or sink drain to avoid clogging the pipe.
4. Do not use hot water to operate the food waste disposer.
5. Do not turn off the water supply or the food waste disposer before the grinding process is completed.
6. M56 and M66 cannot grind fibrous ingredients such as corn husks and bamboo shoots to prevent the fibers from getting stuck in the grinding chamber and affecting the operation of the food waste disposer.
7. Do not grind shells such as oyster/clam/snail shells, raw meat/bones/skin/hair, or high-fiber ingredients such as Chinese medicine residues/durian shells/sugarcane bagasse using any grinding method.
8. Do not use the food waste disposer to process hard materials such as glass, wood or metal.
9. Do not grind any non-food waste.
10. Avoid putting large amounts of food waste into the processor at the same time.
11. Do not put your hands or fingers into the food waste disposer.
Installation conditions of food waste disposer
• A 13A independent switch is set under the kitchen cabinet and the length of the food waste disposer wire is 600mm
• A space of about 50cmx50cm should be reserved at the bottom of the basin
• The inner diameter of the basin drain is 90mm and the outer diameter is 115mm, which is matched with the U-shaped air barrier
• A 33mm diameter hole is opened on the kitchen countertop to install the pneumatic switch. It is recommended that customers provide photos/videos of:
- The location of the basin on the kitchen countertop
- The location of the basin full of water
- The drainage level under the basin, the space inside the kitchen cabinet, the power supply location, etc. for the master's reference and arrange for the master to come to measure the location to ensure that there is enough space for installation (the on-site inspection fee is HK$250* The payment must be made in cash on site. After the installation is completed, the site inspection fee paid will be deducted from the installation service fee. If the technician confirms that the installation cannot be performed after the site inspection, the customer still needs to pay the site inspection fee of HK$250.
Hong Kong SAR
Australia
Indonesia
Malaysia
New Zealand
Philippines
Singapore
United States 
