This paint is a water-based epoxy paint made by using water-based epoxy resin. Unlike solvent-based epoxy coatings, it is an environmentally friendly paint with no harmful ingredients to humans. Therefore, it is the most suitable paint for the interior of buildings, basements, etc. as there is no solvent odor. This paint has advantages of excellent abrasion resistance, durability, and adhesion as well as quick-drying ability and superior mixing and painting workability compared to ordinary water-based epoxy.
Surface treatment :
1. Cure concrete for at least 28 days at a temperature of 21℃ and a relative humidity of 50%.
2. Completely remove the oil, moisture, sand, dust, laitance and other foreign matter from the surface and maintain surface smoothness.
3. The substrate with severe absorption of primer due to poor concrete should be reinforced by additional coating to exhibit excellent adhesion.
Coating method :
1. Reinforce cracks, crevices, and joints between walls and floors with an epoxy putty after primer.
2. Apply smoothly to the base surface using a roller, etc. after evenly mixing the base and hardener.
3. Add the hardener to the base and use after evenly mixing for 3-5 minutes with a power stirrer.
Appropriate construction specifications
▷Primer : CLEANPOXY(W) PRIMER
▷Top coat : CLEANPOXY(W) TOP COAT
Coating conditions :
1. Atmosphere Temperature: 5~35℃, Surface Temperature: 40℃ or below, Relative Humidity: 80% or less, Moisture content in the concrete: 6% or less
2. At low temperature and high humidity, water evaporation on the coating surface during coating is very delayed, and normal properties cannot be exhibited even when it is dried.
This paint is a water-based epoxy paint made by using water-based epoxy resin. Unlike solvent-based epoxy coatings, it is an environmentally friendly paint with no harmful ingredients to humans. Therefore, it is the most suitable paint for the interior of buildings, basements, etc. as there is no solvent odor. This paint has advantages of excellent abrasion resistance, durability, and adhesion as well as quick-drying ability and superior mixing and painting workability compared to ordinary water-based epoxy.
Surface treatment :
1. Cure concrete for at least 28 days at a temperature of 21℃ and a relative humidity of 50%.
2. Completely remove the oil, moisture, sand, dust, laitance and other foreign matter from the surface and maintain surface smoothness.
3. The substrate with severe absorption of primer due to poor concrete should be reinforced by additional coating to exhibit excellent adhesion.
Coating method :
1. Reinforce cracks, crevices, and joints between walls and floors with an epoxy putty after primer.
2. Apply smoothly to the base surface using a roller, etc. after evenly mixing the base and hardener.
3. Add the hardener to the base and use after evenly mixing for 3-5 minutes with a power stirrer.
Appropriate construction specifications
▷Primer : CLEANPOXY(W) PRIMER
▷Top coat : CLEANPOXY(W) TOP COAT
Coating conditions :
1. Atmosphere Temperature: 5~35℃, Surface Temperature: 40℃ or below, Relative Humidity: 80% or less, Moisture content in the concrete: 6% or less
2. At low temperature and high humidity, water evaporation on the coating surface during coating is very delayed, and normal properties cannot be exhibited even when it is dried.
This paint is a water-based epoxy paint made by using water-based epoxy resin. Unlike solvent-based epoxy coatings, it is an environmentally friendly paint with no harmful ingredients to humans. Therefore, it is the most suitable paint for the interior of buildings, basements, etc. as there is no solvent odor. This paint has advantages of excellent abrasion resistance, durability, and adhesion as well as quick-drying ability and superior mixing and painting workability compared to ordinary water-based epoxy.
Surface treatment :
1. Cure concrete for at least 28 days at a temperature of 21℃ and a relative humidity of 50%.
2. Completely remove the oil, moisture, sand, dust, laitance and other foreign matter from the surface and maintain surface smoothness.
3. The substrate with severe absorption of primer due to poor concrete should be reinforced by additional coating to exhibit excellent adhesion.
Coating method :
1. Reinforce cracks, crevices, and joints between walls and floors with an epoxy putty after primer.
2. Apply smoothly to the base surface using a roller, etc. after evenly mixing the base and hardener.
3. Add the hardener to the base and use after evenly mixing for 3-5 minutes with a power stirrer.
Appropriate construction specifications
▷Primer : CLEANPOXY(W) PRIMER
▷Top coat : CLEANPOXY(W) TOP COAT
Coating conditions :
1. Atmosphere Temperature: 5~35℃, Surface Temperature: 40℃ or below, Relative Humidity: 80% or less, Moisture content in the concrete: 6% or less
2. At low temperature and high humidity, water evaporation on the coating surface during coating is very delayed, and normal properties cannot be exhibited even when it is dried.
Hong Kong SAR
Australia
Indonesia
Malaysia
New Zealand
Philippines
Singapore
Hong Kong 
