Made in the USA
Freight will be accurately calculated at checkout.
- Production on your order begins immediately.
- Most of our designs are made to order and typically ship in 3 - 10 business days.
- Orders over 50 panels may require additional lead time.
- Minimum order is 6 panels. (Orders less than 6 panels may be not be fulfilled)
- Panels arrive on a pallet.
- Pallet jack or forklift recommended at receiving end.
- Commercial Grade, 32" by 32" by 1"
- Glass Reinforced Gypsum w/lightweight core.
- Class A, NFPA 286 PASS
- Steel reinforced joints.
- Alignment tabs ensure accurate surface alignment.
PANEL INSTALLATION:
• PANELS must be screw mounted through the face directly to the substrate, typically drywall. Panels are not attached to studs.
• All panel-to-panel edges are glued with approved adhesive as panels are mounted. The backs are not glued, only the panel edges.
• Seams are filled with the approved spackling compound.
• Seams are sanded.
• Surface is sealed with the approved primer/sealer.
• Desired finish paint is applied. Flat paint is recommended, and spray application provides the best results.
To perform the installation of modularArts panels, we recommend that a finish carpenter or millworker mount and edge-glue the panels, and a drywall tradesperson address the seams.
One man-hour per panel should be allowed to bring the installation to a paint-ready state. Drying time of adhesive is not included. Adhesive requires 24 hours to dry. Experience may certainly shorten labor time!
A detailed Instruction Booklet will come with the panels.
Made in the USA
Freight will be accurately calculated at checkout.
- Production on your order begins immediately.
- Most of our designs are made to order and typically ship in 3 - 10 business days.
- Orders over 50 panels may require additional lead time.
- Minimum order is 6 panels. (Orders less than 6 panels may be not be fulfilled)
- Panels arrive on a pallet.
- Pallet jack or forklift recommended at receiving end.
- Commercial Grade, 32" by 32" by 1"
- Glass Reinforced Gypsum w/lightweight core.
- Class A, NFPA 286 PASS
- Steel reinforced joints.
- Alignment tabs ensure accurate surface alignment.
PANEL INSTALLATION:
• PANELS must be screw mounted through the face directly to the substrate, typically drywall. Panels are not attached to studs.
• All panel-to-panel edges are glued with approved adhesive as panels are mounted. The backs are not glued, only the panel edges.
• Seams are filled with the approved spackling compound.
• Seams are sanded.
• Surface is sealed with the approved primer/sealer.
• Desired finish paint is applied. Flat paint is recommended, and spray application provides the best results.
To perform the installation of modularArts panels, we recommend that a finish carpenter or millworker mount and edge-glue the panels, and a drywall tradesperson address the seams.
One man-hour per panel should be allowed to bring the installation to a paint-ready state. Drying time of adhesive is not included. Adhesive requires 24 hours to dry. Experience may certainly shorten labor time!
A detailed Instruction Booklet will come with the panels.
Made in the USA
Freight will be accurately calculated at checkout.
- Production on your order begins immediately.
- Most of our designs are made to order and typically ship in 3 - 10 business days.
- Orders over 50 panels may require additional lead time.
- Minimum order is 6 panels. (Orders less than 6 panels may be not be fulfilled)
- Panels arrive on a pallet.
- Pallet jack or forklift recommended at receiving end.
- Commercial Grade, 32" by 32" by 1"
- Glass Reinforced Gypsum w/lightweight core.
- Class A, NFPA 286 PASS
- Steel reinforced joints.
- Alignment tabs ensure accurate surface alignment.
PANEL INSTALLATION:
• PANELS must be screw mounted through the face directly to the substrate, typically drywall. Panels are not attached to studs.
• All panel-to-panel edges are glued with approved adhesive as panels are mounted. The backs are not glued, only the panel edges.
• Seams are filled with the approved spackling compound.
• Seams are sanded.
• Surface is sealed with the approved primer/sealer.
• Desired finish paint is applied. Flat paint is recommended, and spray application provides the best results.
To perform the installation of modularArts panels, we recommend that a finish carpenter or millworker mount and edge-glue the panels, and a drywall tradesperson address the seams.
One man-hour per panel should be allowed to bring the installation to a paint-ready state. Drying time of adhesive is not included. Adhesive requires 24 hours to dry. Experience may certainly shorten labor time!
A detailed Instruction Booklet will come with the panels.
Hong Kong SAR
Australia
Indonesia
Malaysia
New Zealand
Philippines
Singapore
United States 
