How to Install Onduline Roofing: Step-by-Step Guide

Onduline is a worldwide leader in lightweight roofing systems, offering high-quality products that are both durable and weather-resistant. Their roofing materials are made of cellulose fibers, bitumen, and resin, creating a lightweight yet strong product that is suitable for a wide range of buildings and structures.

Onduline products come in a range of sizes, shapes, and colors to suit different types of buildings, from homes to commercial and agricultural structures. With over 75 years of experience, Onduline has become a trusted brand for those seeking reliable and long-lasting roofing solutions.

Tools and Materials You Will Need:

• Onduline Classic roofing sheets
• Onduline roofing screws
• Onduline ridge
• Onduline rubber filler
• Onduband
• Circular saw or hand saw
• Power drill
• Hammer
• Steel tape
• Chalk line
• Roofing knife
• Safety glasses
• Gloves
• Metal or Wood Purlins

Step-by-Step Guide to Installing Onduline Classic Roof

Check the structure of the roof and slope of at least 15 degrees

Step 1: Laying the Purlins

Start by fixing the bottom purlin and maintaining a spacing of 45cm between each purlin. Ensure that the purlins are in one straight line and parallel to each other.

Purlin spacing of 24cm

• Angle: 5-10 degrees
• Use 20 screws (8+4+4+4)
• Side overlap: 2 corrugations
• Top overlap: 32cm sheets
• Overhang: 7cm

Purlin spacing of 45cm

• Angle: 10 degrees up
• Use 14 screws (5+3+3+3)
• Side overlap: 1 corrugation
• Top overlap: 20cm

Step 2: Fixing of Sheets

To start fixing the sheets to the roof, begin at the opposite end of the prevailing winds. On a second row, cut a sheet in half vertically and use it to lay the courses of sheets in a broken bond pattern. This pattern helps reduce the overall thickness of the structure. Remember to follow this pattern for every alternate row.

Step 3: Follow Overlapping Rules

To ensure that your roof remains waterproof over time, it is essential to follow some rules. The required amount of overlap on the sides and ends of the roof depends on the pitch of the roof. If the roof is above 15 degrees, below are the details:

• End overlap: 20 cm
• Side overlap: 1 corrugation

You should drill at least 14 screws per sheet. When installing Onduline, it is crucial to follow the correct order and pattern since it is a special material.

Here are the screw requirements:

• Use 5 screws at each corrugation at the end overlap or eaves.
• Use 3 screws at the intermediate purlins of the sheet.
• Use 3 screws at the second and third intermediate purlins as well.

To ensure that your roof remains waterproof over time, it is essential to follow some rules. The required amount of overlap on the sides and ends of the roof depends on the pitch of the roof. If the roof pitch is below 15 degrees, these are the details;

• End overlap: 24 cm
• Side overlap: 2 corrugations

You should drill at least 20 screws per sheet. When installing Onduline, it is crucial to follow the correct order and pattern since it is a special material.

Here are the screw requirements:

• Use 8 screws at each corrugation at the end overlap or eaves.
• Use 4 screws at the intermediate purlins of the sheet.
• Use 4 screws at the second and third intermediate purlins as well.

Step 4: Sheet Fixing

To ensure a secure fit, it's important to select the correct type of drill screw for your purlin.

1. Once you have the right screw, place its head into the socket of your drive tool.
2. Align the top side of the corrugation with the center of the purlin.
3. Drive the screw through the top of the corrugation and into the purlin until the corrugation is properly stressed.

To avoid over-compressing the corrugation, we recommend using a drill with an adjustable torque setting and support for the drilling direction. And always make sure to use Onduline fasteners for sheet fixing. With these tips, you can ensure a sturdy and reliable installation.

Step 5: Ridge Fixing

• If the distance between the last purlin and the ridge is greater than 15cm, add an extra purlin.
• Start the ridge at the opposite end of the roof from the prevailing winds.
• Maintain a minimum of 15 cm of overlap between ridges.

Step 6: Rubber Filler (Optional)

Our Corrugated Ventilated Filler is designed to prevent birds and other animals from entering the roof space through the eave and ridge.

Step 7: Repair Hip Before Attaching Ridge to Purlins

Repair the hip first, then attach the ridge to the purlins. If needed, cover and tidy up the ridges.

Step 8: Valleys

• The depth of the valley should be 7.5 cm, and the sheets should be cut parallel to the valley line.
• The overhang should be 4 cm.
• You have the option of using any metal brand for Valley. 

Step 9: Curved Roofs

Once the frame design is established, it's important to continuously set up the line courses to ensure the purlins are in the correct positions. For curved structures with a minimum radius of 6m, Onduline sheets are the recommended option.

Installing an Onduline Classic Roof: Step-by-Step Video Guide

Onduline Classic: The Most Popular Roofing Solution

Onduline Classic is one of the most popular products offered by Onduline Philippines. It comes in a range of sizes and colors to suit different types of buildings. Additionally, it provides excellent protection against the elements while also being easy to install.

Overall, when choosing a roofing solution for your home or business, it's important to consider factors such as durability, weight, ease of installation, and cost-effectiveness. With its many benefits and long-lasting performance record, Onduline Roofs is an excellent choice for those seeking a high-quality roofing solution that will stand the test of time.

Enquire with us today to learn more about our Onduline roofing products and how they can benefit your building or structure. We're happy to provide expert advice, answer any questions you may have, and provide a quote for your roofing project.