Installation guide:
• Prior to installation, the subfloor must be heated for -14 days if heating is available, and if not,
allow sufficient time to dry out completely.
• Room temperature must be maintained at 18° C or higher before and during installation.
• The flooring must be allowed to acclimate in the room to be installed for a minimum of 24 hours
and be stacked flat on the floor to avoid bending the floor.
• Prior to installation, please ensure that both color and lot# are the same.
• When installing ECOCLlcK+, be sure to keep dust, dirt or foreign particles away from the locking strip.
• Regularly sweep floor to remove sand and grit that can scratch floor.
• For best results, use only water with a mop. Avoid flooding the floor with too much water.
• For heavily soiled areas, use a neutral ph balanced floor cleaner.
• Use caution when lifting boxes.
• Promptly remove any standing water to avoid slippage.
• Keep ECOCLlcK+ on the flat surface to keep it from warping
Installation guide:
• Prior to installation, the subfloor must be heated for -14 days if heating is available, and if not,
allow sufficient time to dry out completely.
• Room temperature must be maintained at 18° C or higher before and during installation.
• The flooring must be allowed to acclimate in the room to be installed for a minimum of 24 hours
and be stacked flat on the floor to avoid bending the floor.
• Prior to installation, please ensure that both color and lot# are the same.
• When installing ECOCLlcK+, be sure to keep dust, dirt or foreign particles away from the locking strip.
• Regularly sweep floor to remove sand and grit that can scratch floor.
• For best results, use only water with a mop. Avoid flooding the floor with too much water.
• For heavily soiled areas, use a neutral ph balanced floor cleaner.
• Use caution when lifting boxes.
• Promptly remove any standing water to avoid slippage.
• Keep ECOCLlcK+ on the flat surface to keep it from warping
Installation guide:
• Prior to installation, the subfloor must be heated for -14 days if heating is available, and if not,
allow sufficient time to dry out completely.
• Room temperature must be maintained at 18° C or higher before and during installation.
• The flooring must be allowed to acclimate in the room to be installed for a minimum of 24 hours
and be stacked flat on the floor to avoid bending the floor.
• Prior to installation, please ensure that both color and lot# are the same.
• When installing ECOCLlcK+, be sure to keep dust, dirt or foreign particles away from the locking strip.
• Regularly sweep floor to remove sand and grit that can scratch floor.
• For best results, use only water with a mop. Avoid flooding the floor with too much water.
• For heavily soiled areas, use a neutral ph balanced floor cleaner.
• Use caution when lifting boxes.
• Promptly remove any standing water to avoid slippage.
• Keep ECOCLlcK+ on the flat surface to keep it from warping
Singapore
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
