Inverter Screw Type Compressor
- Semi-hermetic screw compressor specially designed for HFC134a with higher compression efficiency under full Load as well as part load;
- Precisely manufactured twin-screw rotor with aircraft-grade featuring in high reliability, low noise, low vibration and stable running;
- The inverter motor drives the bear directly with fewest moving components and wearing parts that causes no energy loss and is with higher mechanical efficiency;
- Automatically adjust power output according to load by microprocessor.
Electronic Expansion Valve
EXV, with high-sensitivity and precise control, has high adaptability of partial load working condition. And it can improve the efficiency of the unit under full load as well as part load.
Inverter Fan
High efficiency exterior rotor inverter fan from German brand. It can reduce the energy consumption and fan noise.
Excellent Performance
The standard harmonic distortion rate THD of the unit meets the requirements of IEC61000-3-4 and GB/T17625.
In accordance with IEEE-519 and GB/T14594-93 harmonic requirements for total distortion, the harmonic distortion rate THD can be as low as 5% or less, and the correction compensation displacement power factor is 0.95 during the operation of the unit. adopts refrigerant cooling and the optimized piping design which ensures cooling of the inverter and avoids unnecessary The inverter cooling capacity loss.
Reliable Operation
The unit is designed, manufactured, tested according to international and local standard AHRI, EN, UNI, JIS, GB/T18430.1 for reliable performance. And the electrical system is also strictly designed and produced comply with standard IEC60204-1/GB5226.1. The unit is controlled by the dedicated microprocessor control system. In order to protect the operation safety, the high/ low pressure switch, over/under voltage, phase failure, overload, winding overheat, gas exhaust temperature, water flow switch and oll heater are all equipped. Casing protection confirms with GB4208-2008.
Energy Saving
ERACS.C-INV adopts inverter screw type compressor integrated with latest inverter technology. It has higher part load efficiency and more precise control accuracy. IPLV@AHRI can achieve up to 5.17, 10% higher than convectional screw units, with higher operation efficiency.
Green Technology
- Environment triendly HFC134
- Optimized refrigerant system for better electric seving, lower CO, emission and higher operation. efficiency.
Super Low Noise
All compressors of ERACS.C-INV series are installed on the vibration isolator. The rubber pad is also fixed between compressor and frame to prevent vibration and noise. The fan is exclusive designed with aircraft grade blades and aluminum-cast exterior motor as well as the air deflector cylinder to eliminate alr side noise.
Cost Saving
Compared with conventional units, INVERTER series can have the payback in 2 years.
Inverter Screw Type Compressor
- Semi-hermetic screw compressor specially designed for HFC134a with higher compression efficiency under full Load as well as part load;
- Precisely manufactured twin-screw rotor with aircraft-grade featuring in high reliability, low noise, low vibration and stable running;
- The inverter motor drives the bear directly with fewest moving components and wearing parts that causes no energy loss and is with higher mechanical efficiency;
- Automatically adjust power output according to load by microprocessor.
Electronic Expansion Valve
EXV, with high-sensitivity and precise control, has high adaptability of partial load working condition. And it can improve the efficiency of the unit under full load as well as part load.
Inverter Fan
High efficiency exterior rotor inverter fan from German brand. It can reduce the energy consumption and fan noise.
Excellent Performance
The standard harmonic distortion rate THD of the unit meets the requirements of IEC61000-3-4 and GB/T17625.
In accordance with IEEE-519 and GB/T14594-93 harmonic requirements for total distortion, the harmonic distortion rate THD can be as low as 5% or less, and the correction compensation displacement power factor is 0.95 during the operation of the unit. adopts refrigerant cooling and the optimized piping design which ensures cooling of the inverter and avoids unnecessary The inverter cooling capacity loss.
Reliable Operation
The unit is designed, manufactured, tested according to international and local standard AHRI, EN, UNI, JIS, GB/T18430.1 for reliable performance. And the electrical system is also strictly designed and produced comply with standard IEC60204-1/GB5226.1. The unit is controlled by the dedicated microprocessor control system. In order to protect the operation safety, the high/ low pressure switch, over/under voltage, phase failure, overload, winding overheat, gas exhaust temperature, water flow switch and oll heater are all equipped. Casing protection confirms with GB4208-2008.
Energy Saving
ERACS.C-INV adopts inverter screw type compressor integrated with latest inverter technology. It has higher part load efficiency and more precise control accuracy. IPLV@AHRI can achieve up to 5.17, 10% higher than convectional screw units, with higher operation efficiency.
Green Technology
- Environment triendly HFC134
- Optimized refrigerant system for better electric seving, lower CO, emission and higher operation. efficiency.
Super Low Noise
All compressors of ERACS.C-INV series are installed on the vibration isolator. The rubber pad is also fixed between compressor and frame to prevent vibration and noise. The fan is exclusive designed with aircraft grade blades and aluminum-cast exterior motor as well as the air deflector cylinder to eliminate alr side noise.
Cost Saving
Compared with conventional units, INVERTER series can have the payback in 2 years.
Inverter Screw Type Compressor
- Semi-hermetic screw compressor specially designed for HFC134a with higher compression efficiency under full Load as well as part load;
- Precisely manufactured twin-screw rotor with aircraft-grade featuring in high reliability, low noise, low vibration and stable running;
- The inverter motor drives the bear directly with fewest moving components and wearing parts that causes no energy loss and is with higher mechanical efficiency;
- Automatically adjust power output according to load by microprocessor.
Electronic Expansion Valve
EXV, with high-sensitivity and precise control, has high adaptability of partial load working condition. And it can improve the efficiency of the unit under full load as well as part load.
Inverter Fan
High efficiency exterior rotor inverter fan from German brand. It can reduce the energy consumption and fan noise.
Excellent Performance
The standard harmonic distortion rate THD of the unit meets the requirements of IEC61000-3-4 and GB/T17625.
In accordance with IEEE-519 and GB/T14594-93 harmonic requirements for total distortion, the harmonic distortion rate THD can be as low as 5% or less, and the correction compensation displacement power factor is 0.95 during the operation of the unit. adopts refrigerant cooling and the optimized piping design which ensures cooling of the inverter and avoids unnecessary The inverter cooling capacity loss.
Reliable Operation
The unit is designed, manufactured, tested according to international and local standard AHRI, EN, UNI, JIS, GB/T18430.1 for reliable performance. And the electrical system is also strictly designed and produced comply with standard IEC60204-1/GB5226.1. The unit is controlled by the dedicated microprocessor control system. In order to protect the operation safety, the high/ low pressure switch, over/under voltage, phase failure, overload, winding overheat, gas exhaust temperature, water flow switch and oll heater are all equipped. Casing protection confirms with GB4208-2008.
Energy Saving
ERACS.C-INV adopts inverter screw type compressor integrated with latest inverter technology. It has higher part load efficiency and more precise control accuracy. IPLV@AHRI can achieve up to 5.17, 10% higher than convectional screw units, with higher operation efficiency.
Green Technology
- Environment triendly HFC134
- Optimized refrigerant system for better electric seving, lower CO, emission and higher operation. efficiency.
Super Low Noise
All compressors of ERACS.C-INV series are installed on the vibration isolator. The rubber pad is also fixed between compressor and frame to prevent vibration and noise. The fan is exclusive designed with aircraft grade blades and aluminum-cast exterior motor as well as the air deflector cylinder to eliminate alr side noise.
Cost Saving
Compared with conventional units, INVERTER series can have the payback in 2 years.
Singapore
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
